Figure 122 Cross-Connection Clone - Alcatel-Lucent 9558HC User Manual

Navigator area
Networking
228
Figure 122: Cross-connection clone
This menu is not applicable in Single NE mode with 7705 SAR configuration. In Single NE
mode with 7705 SAR, cross-connections are set up as part of configuration of the 7705 SAR.
This menu must be used to assign (or to show) the networking configuration of the NE.
This menu has the following sub-menus:
• Network Interfaces
• Static Routing
• Routing Table
• Trusted SNMP Managers
None of the networking screens are available when MPR-e is in Single NE mode with
7705 SAR configuration. The MPR-e is integrated into the SAR and has to be considered one
of its peripherals.
MPR-e