Operations With Navpilot-300; Standby (Stby) Mode - Furuno NAVpilot-300 Operator's Manual

5.9 GC-001 Operations With NAVpilot-300
Depending on the NAVpilot-300's operating mode, the function of most keys on your
GC-001 changes. The following sections cover the function of each key, based on the
NAVpilot-300's operating mode.
Note: Where more than one GC-001 is paired to your system, to avoid simultaneous
operation, the last-received remote signal is used for operation.
5.9.1

Standby (STBY) mode

Name
PORT1 key
PORT10 key
STBD1 key
STBD10 key
DIRECT key
STBY AUTO key
POWER/MENU key
Note 1: In STBY mode, the
Note 2: In STBY mode, the
press" function.
Long press:
Activates [NFU(PORT)] mode until the key is released. Release
the key to return to STBY mode.
Long press:
Activates [NFU(PORT)] mode until the key is released. Release
the key to return to STBY mode.
No function in [STBY] mode.
Short press, with no destination set at the GPS navigator:
Activates [AUTO] mode.
Short press, with a destination set at the GPS navigator:
Open the mode ([NAV]/[AUTO]/[CANCEL]) selection window.
Short press:
Opens the [TURN] menu.
Long press:
Turns the GC-001 off.
key has no "long press" function.
. ,
5. GESTURE CONTROLLER GC-001
Description
and keys have no "short
5-13