How To Set Up The Fishhunter ™ Parameters - Furuno NAVpilot-300 Operator's Manual

2. STEERING MODES
2.5.3 How to set up the FishHunter
To set up the parameters for FishHunter
1. Open the menu.
2. Select [Other Menu].
3. Select [Fish Hunter Option]. The FishHunter
Fish Hunter Option
Orbit
Spiral
Figure 8
4. Select the turn you want to set up. The turn parameters appear, as shown in the
figures below.
Orbit
Orbit Radius:
+
Prev
Spiral
Spiral Speed:
Spiral Radius:
+ - Prev
Spiral
Spiral Speed:
Spiral Radius:
+
Prev
5. Change the parameters as required.
6. Close the menu.
Note: While FishHunter
the turn in use (Zigzag turn excluded).
2-16
Prev Ent
Setting range:
0.05NM
0.05 to 9.99 NM
Ent
Setting range:
0.5kn
0.1 to 3.0 kn
0.05NM
Ent
0.5
Setting range:
0.05NM
0.05 to 9.99 NM
Ent
™
mode is active, you can press
™
parameters
™
turns, follow the procedure below.
™
menu appears.
Fish Hunter Option
1
Zigzag
SABIKI
1
Figure 8
Figure 8 Radius:
+
Prev
Zigzag
Turn Angle:
Width:
+
- Prev
Zigzag
Turn Angle:
Width:
+ Prev
Prev Ent
Setting range:
0.05NM
0.05 to 9.99 NM
Ent
Setting range:
90°
30 to 150°
0.05N
Ent
90°
Setting range:
0.05NM
0.05 to 0.99 NM
Ent
to access the menu for