Gesture Controller Gc-001; Gesture Controller Gc-001 Overview; How To Turn The Power On/Off - Furuno NAVpilot-300 Operator's Manual

5.

GESTURE CONTROLLER GC-001

Note: With regards to safety and handling instructions for your GC-001, see the User
Guide included with the GC-001.
5.1

Gesture Controller GC-001 Overview

Depending on the NAVpilot-300's operating mode, the function of most keys on your
GC-001 changes. For detailed information regarding key operation, see section 5.9 .
PORT 1 key
DIRECT key
PORT 10 key
5.2

How to Turn the Power On/Off

Turning the power on
Press and hold
up screen. A self-diagnostic test begins and the program numbers for the GC-001 ap-
pear, followed by test results for ROM, RAM and backup.
When all test results show "OK", the GC-001 attempts to connect to the paired NAVpi-
lot-300. When the GC-001 connection to the NAVpilot-300 is complete, the main
screen appears and you can use the GC-001 to remotely control the NAVpilot-300.
See section 5.8 to pair other GC-001 controllers with your NAVpilot-300.
to turn the power on. The GC-001 beeps, then shows the start-
BOOTER:
6454029-XX. XX
MAIN:
6454030-XX. XX
STBD 1 key
STBD 10 key
STBY/AUTO key
Power/Menu key
BLE:
6454031-XX. XX
ROM: OK
RAM: OK
BACKUP: OK
HW:XXX
X: denotes version
5-1