Turn Mode; How To Set The Steering Behavior Of Your Boat After You Arrive At A Waypoint; How To Select A Turn And Start The Turn - Furuno NAVpilot-300 Operator's Manual

2. STEERING MODES
2.3.4 How to set the steering behavior of your boat after you arrive
at a waypoint
The FishHunter
after it reaches the last waypoint in a route. For details on the FishHunter
section 2.5.
To set the steering behavior for use with the FishHunter
below.
1. With NAV mode active, open the menu.
2. Select [AFTER ARRIVAL] to show the after arrival options window.
3. Select the appropriate option.
• Go Straight: Continue on the same heading.
• Orbit to PORT: Continuously turn to port, "orbiting" the final waypoint.
• Orbit to STBD: Continuously turn to starboard, "orbiting" the final waypoint.
• Figure Eight PORT: Turn in a figure-eight motion to the port direction.
• Figure Eight STBD: Turn in a figure-eight motion to the starboard direction.
4. Close the menu.
2.4

TURN Mode

The TURN mode turns the boat once only, in the selected direction. For repeated
turns, use the FishHunter
2.4.1

How to select a turn and start the turn

Turn mode has two types of turns available: Turn1 (default: 180° turn) and Turn2 (de-
fault: 90° turn). In STBY, AUTO and NAV modes, you can select the turn direction
(port or starboard). Further, the angle of the turn can be changed.
To activate TURN mode, follow the procedure below.
1. Press the MENU key (
2-8
™
mode, when enabled, can control the steering behavior of your boat
™
mode (see section 2.5).
) to show the Turn menu.
SABIKI
Setup
™
mode, follow the procedure
Prev Run
™
mode, see