Furuno NAVpilot-300 Operator's Manual page 29

2. Select a turn. The cursor highlights current selection.
SABIKI Turn 180°
to PORT*
*: Turn angle for these turns depends on menu setting.
The default for Turn1 turns is 180° and the default for Turn2 turns is 90°.
Orbit Turn Spiral Turn
to STBD to PORT
Note: Turn angle can be selected before the turn is started, by pressing
details, see section 2.4.2.
3. Press
10
After you start the turn, an information message appears, and the audible alert sounds
three times. The on-screen indications change during the turn in a manner to that
shown in the example figure below.
Start of turn indication
(oriented at 0°)
Own
Ship
marker
When the turn is completed, an information message appears.
Note: Operation from the GC-001 is available in TURN mode. See section 5.4.
Turn 180° Turn 90°
to STBD* to PORT*
Spiral Turn Figure-8 Turn
to STBD
to start the turn.
COG
At turn start
Turn 90°
to STBD*
Figure-8 Turn
to PORT to STBD
End of turn indication
(Appears at turn angle)
Selected
turn
angle
Mid-turn
2. STEERING MODES
Orbit Turn
to PORT
Zigzag Turn
. For
10
Turn completed
2-9