DIS Digital Conference System
Set channel names
Each channel can be assigned a name via the
Channel Names menu (4E). This can be 'Floor' or
one of 30 pre-defined ISO language names. Also
up to 32 user-defined names can be added.
The language in which the pre-defined names are
presented can be chosen via the Language List
menu option (4D).
4 Setup/4D Language List
4D Language List
English
Options
Description
English
Present language list in English.
French
Present language list in French.
Original
Present each language name in
it's original language (e.g.
English, Français, Deutsch,
etc.).
4 Setup/4E Ch. Names
4E Channel 01
English
Options
Description
4E Channel nn
Select which channel to name.
Channel nr. "nn": {00 ... 31}
'Floor'
Use this name for the channel
that carries the 'Floor'
language.
ISO language
Choose from pre-programmed
names
ISO language names.
User defined
Up to 32 userdefined names
names
(max. 12 characters) can be
added and chosen.
Disable or enable carriers
Normally the channels are automatically assigned
to the available carriers. However, when the
reception quality of a specific carrier is not good,
that carrier can be disabled manually. The
channels are then automatically re-assigned to the
next available carriers.
Each of the 8 carriers (0 to 7) can be disabled or
enabled in the Carrier Settings menu (4F).
4 Setup/4F C. Settings
4F Carrier 0
Enabled
Options
4F Carrier n
Disabled
Enabled
View carrier assignments
With menu option 4H the carrier assignment
can be seen, i.e. which channels are
transmitted on each carrier.
Note that the number of channels that can be
distributed on one carrier depends on the
chosen quality mode.
4 Setup/4G C. Overview
4G Carrier 0
Ch. 00 01 02 03
Options
4H Carrier n
Ch nn nn nn nn
31
Description
Select which carrier to configure.
Carrier nr. "n":
{0 ... 8}
The selected carrier is disabled
(off).
The selected carrier is enabled
(on).
Description
Select which carrier to view.
Carrier nr. "n":
{0 ... 8}
Shows the channel numbers that
are assigned to the selected
carrier. The symbol '- -' is used
when less than 4 channels are
assigned.
Channel nr. "nn": {00 ... 31}
If
the
channel
number
represented one time Mono SQ
is assigned to this carrier.
If
the
channel
number
represented two times Mono PQ
or Stereo SQ is assigned to this
carrier.
If
the
channel
number
represented four times Stereo
PQ is assigned to this carrier.
User Manual
is
is
is