Set Monitoring Options; View Version Information - Shure DT 6008 User Manual

DIS Digital Conference System

Set monitoring options

The Monitoring sub-menu (2) is used to set which
signal is sent to the monitoring headphone output.
It can be one of the inputs, one of the channels or
no signal.
When the sensitivity of one of the inputs is being
changed in the Setup menu (4I, 4J or 4K), or
when assigning inputs to channels (menu 4C, Per
Channel), the monitoring output automatically
switches temporarily to that source, even when
the option 'None' has been chosen.
2 Monitoring
2 Monitoring
In. 04 -9 dB
Options Description
In. nn dd dB The signal from audio input "nn" is
available on the monitoring
headphone output
Input nr. "nn":
Volume: "dd" dB {-31 ... 0}
Ch. nn dd dB The signal on channel "nn" is
available on the monitoring
headphone output.
Channel nr. "nn": {00 ... 31}
Volume: "dd" dB {-31 ... 0}
Aux.L dd dB The signal on the Aux. Left input is
available on the monitoring
headphone output.
Volume: "dd" dB {-31 ... 0}
AuxR dd dB The signal on the Aux. Right input is
available on the monitoring
headphone output.
Volume: "dd" dB {-31 ... 0}
None dd dB The monitoring headphone output is
switched off during normal
operation, but is active when the
sensitivity of one of the inputs is
being changed.
Volume: "dd" dB {-31 ... 0}
{00 ... 31}
When the headphone output is disabled (see
section 0), the output level cannot be changed
and the level indicator is not visible.
The 'Source/volume' screen also displays level
meters (two for a stereo source, one for a mono
source) for a visual indication of the actual
signal strength
:
= low level
= high level
= overflow.

View version information

In the Enquiry sub-menu (3), version
information of the transmitter can be found.
This information should be mentioned in service
requests or failure reports.
3 Enquiry
3A Serial Number
FC.0.0012D
Options
3A Serial
Number
3B HW Version
3C FPGA
Version
3D FW Version
28
Description
Shows the serial number of the
transmitter board.
Shows the version number of
the transmitter board.
Shows the version number of
the FPGA software of the
transmitter board.
Shows the version number of
the transmitter firmware.
User Manual