Ct 6056 Charging Tray; Description; Charging Procedure - Shure DT 6008 User Manual

DIS Digital Conference System

CT 6056 Charging Tray

Description

The charging tray can recharge up to 56 receivers
at once. The charging unit which is designed in a
suitcase for portable unit contains the power supply
with automatic mains voltage selection.
The charging electronics and a charging indicator
LED are included in each receiver. The charging
circuitry checks if a battery pack is present and
controls the charging process.
Note: The charging tray is only intended to charge
DR 60xx receivers with a BP 6001 battery pack.
You cannot charge other receiver types with the
CT 6056 charging tray, nor can you use other
charging trays to charge DR 60xx receivers.
Figure 0-A Charging Tray, front view.
1. Main Input -Male Euro mains socket. The
charging unit has automatic mains voltage
selection.
A mains cable is provided.
2. Mains on/off switch
3. Receiver positions - One charging unit can
charge up to 56 receivers simultaneously

Charging procedure

Ensure that the charging tray is connected to the
mains and that it is switched on. Place the receivers
firmly in the charging compartments. The charging
indicator LEDs on all receivers should illuminate.
These LEDs indicate the charging status of each
receiver:
LED color Charging status
Charging completed.
Green
Charging in progress.
Red
Error status. See chapter 6,
Red blinking
Trouble shooting
Off Charger
receiver
inserted.
Notes
• It is preferred to switch on the charging unit
before inserting the receivers. Receivers can be
inserted or removed without damage while the
charging unit is switched on.
• Charge the battery pack to full capacity before
using them for the first time.
• The charger always applies fast charge during
the first 10 minutes after inserting a receiver.
Inserting the receiver multiple times with a fully
charged battery
avoided, as this will damage the battery pack.
• Continuously charging the receiver will not
damage the receiver or battery pack. Receivers
can therefore safely be left in their charging
positions when they are not used.
Notes continued:
• When the rechargeable battery pack is used, it
is advisable to check regularly after three years
that the batteries are not leaking.
If there is any sign of leakage or corrosion,
replace the battery pack. Ensure that only the
battery pack BP 6001 is used.
The battery pack has to be replaced at least
every five years
40
User Manual
switched off
not properly
pack should therefore
or
be