DIS Digital Conference System
Configuration and operation
The next sections give descriptions of the possible
configuration options. Each description is followed
by
the
relevant
menu
information per menu option.
The default values (see section 'Reset all options
to factory defaults') are indicated by an asterisk
(*) when applicable.
Start-up
When the transmitter is switched on, the display
shows the Transmitter Status screen, which is the
first item of the Main menu.
The display also goes to this screen after 3
minutes of inactivity. In case the system detects a
fault, the display shows a flashing fault message
(see section 0).
Main menu
The main menu contains the screens to view the
transmitter status and the radiator fault status. It
items
with
detailed
also contains the entry points to the Monitoring,
Enquiry and Setup sub-menus.
Menu Item
Item Description
Transmitter
Shows
Status
(see section 0)
1 Fault Status
Shows the radiator fault status
(see section 0)
2 Monitoring . . .
Go to the 'Monitoring' sub-menu
(see section 0)
3 Enquiry . . .
Go to the 'Enquiry' sub-menu
(see section 0)
4 Setup . . .
Go to the 'Setup' sub-menu (see
sections 0 and higher)
Note: To enter the Setup sub-
menu, push and hold the button
for at least 3 seconds
26
User Manual
the
transmitter status