Set Channel Quality And Assign Inputs To Channels - Shure DT 6008 User Manual

DIS Digital Conference System
Set channel quality and assign inputs to
channels
The audio quality of the channels (mono/stereo,
standard/premium) can be set in sub-menu 4D.
The quality can be set the same for all channels or
for each channel separately. Note that choosing
stereo and/or premium quality uses more
bandwidth and decreases the number of available
channels (see section 0). In stereo mode, the left
signal is always an even numbered input. The next
higher input number is used for the right signal.
When the quality is set the same for all channels
with the 'All Mono' or 'All Stereo' options, the
inputs are assigned automatically to the channels
as indicated in the table below:
All Mono
Channel Input Channel
00 00
01 01
... ...
31 31
With menu option 4C (Per Channel Settings), the
assignment can also be done for each channel
separately.
4 Setup/4C Ch. Quality
4C Ch. Quality
All Mono SQ
Options Description
All Mono SQ Set all channels to mono, standard
quality.
All Mono PQ Set all channels to mono, premium
quality.
All Stereo Set all channels to stereo, standard
SQ quality.
All Stereo Set all channels to stereo, premium
PQ quality.
Per Channel Select this option to go to the 'Per
. . . Channel Settings' menu.
Per Channel Settings
4 Setup/4C Ch. Quality
4C Channel 01
Mono SQ In 01
Options Description
4C Channel nn Select which channel to
configure.
All Stereo
Input L Input R
00 00 01
01 02 03
... ... ...
15 30 31
Channel nr. "nn": {00 ... 31}
Disabled In nn Disable selected channel.
Input nr. "nn":
Mono SQ In nn Set selected channel to mono,
standard quality.
Input nr. "nn":
31}
Select the audio input that
should be distributed on the
selected channel.
Mono PQ In nn Set selected channel to mono,
premium quality.
Input nr. "nn":
31}
Select the audio input that
should be distributed on the
selected channel.
Stereo SQ In nn Set selected channel to stereo,
standard quality.
Input nr. "nn":
31}
Select the audio input that
should be distributed on the
selected channel. For stereo
signals, the input number of the
left signal (even number)
should be selected.
Stereo PQ In nn Set selected channel to stereo,
premium quality.
Input nr. "nn":
31}
Select the audio input that
should be distributed on the
selected channel. For stereo
signals, the input number of the
left signal (even number)
should be selected.
Note: An asterisk (*) is shown behind the
channel number when the channel in the
configured quality does not fit on the available
carriers (see section 0).
30
User Manual
{00 ... 31}
{00 ...
{00 ...
{00 ...
{00 ...