Set Up Microphones - Shure MXW1 User Manual

System Setup
1. Arrange microphones in the charger.
Microphones are linked to channels according to the arrangement in the charger.
8-Channel Charger
(NCS8)
1 2 3
5 6 7
Charger Slots Correspond to Channels
2. Link the microphones to channels.
The Link procedure can be done from two places:
• Charger: Press and hold the Link button for 6 seconds. The LEDs flash during the process and turn solid green once the link is successful.
• GUI: From the Configuration page, press the Link button in the group row.
13

Set Up Microphones

4-Channel Charger
(NCS4)
4
1 2
3 4
8
link
For gooseneck mics
For bodypacks, handhelds
Connecting the Microphone to the Charger Slot
and boundary mics.