DIS Digital Conference System
Configure auxiliary inputs
The way the signals on the auxiliary inputs (Aux-.L
and Aux.-R) are handled can be set in the Aux.
Input Mode menu (4H).
When the option 'Stereo' is chosen, the signals on
both Aux. inputs are distributed as a stereo signal
to all channels. This setting can for instance be
used to transmit a music signal during breaks in a
conference.
Note that the Transmission mode must be set to
'Aux to All' (menu item 4A) to actually transmit
this stereo signal.
The 'Stereo to Mono' and 'Mono+ Emergency'
options can be selected when the transmitter is
used in combination with an interpretation system.
The Aux. input(s) will be distributed to the
Symmetrical Audio Input.
4 Setup/4H Aux. Input
4H Aux. Input
Stereo
Options
Description
Stereo
The
distributed
channels when the transmission
mode (menu item 1) is set to
'Aux to All'.
Stereo to Mono
The Aux-L and Aux-R inputs are
combined into a mono signal and
distributed to the Symmetrical
Audio Input.
Mono +
The Aux-L input is distributed to
Emergency
the Symmetrical Audio Input
and
Interpreters
present). The Aux-R input is
distributed as emergency signal
to
emergency switch is closed.
Set sensitivity of the inputs
The sensitivity of the audio and Aux. inputs can be
set in the Input Sensitivity menus (4I, 4J, 4K).
The sensitivity can be set the same for all audio
inputs (menu item 4K) or for each audio input
separately.
4 Setup/4I Level Aux. L
4I Level Aux.L
0 dB
Aux.
inputs
will
in
stereo
to
Module
(when
all
channels
when
Options
xx db
4 Setup/4J Level Aux. R
4J Level Aux.R
0 dB
Options
xx db
4 Setup/4K Level Inputs
4K Level Inputs
All
Options
All
be
all
Per Input ...
Per Input Sensitivity settings
4 Setup/4K Level Inputs
4K Sens. Input 00
0 dB
Options
the
4K Sens.Input
nn
xx db...
The sensitivity screens also display a level
meter for a visual indication of the actual signal
strength:
32
Description
Set the required sensitivity for
the left auxiliary input.
Level "xx" dB:
Description
Set the required sensitivity for
the right auxiliary input.
Level "xx" dB:
-6 dB
Description
xxdB
Set the sensitivity of all audio
inputs to a user defined level.
Level "xx" dB:
Select this option to go to the
'Per Input Sensitivity Settings'
menu.
Description
Select which input to set.
Input nr. "nn":
Select the required sensitivity.
Level "xx" dB:
+6}
= low level
= high level
= overflow.
User Manual
{-6 ... +6}
{-6 ... +6}
{-6 ... +6}
{00 ... 31}
{-6 ...