Customizing Your Workspace; Allowing The Far-End System To Control Your Camera; Allowing Video Display On The Web - Polycom RealPresence Group 300 User Manual

User's Guide for the Polycom RealPresence Group Series

Customizing Your Workspace

Allowing the Far-End System to Control Your Camera

Allowing Video Display on the Web

38
To add a system to a call:
1 While in a call, press the # key on the Polycom system remote control to
access the tone pad.
Press the Select button to activate flash hook. The far-end system is put
2
on hold.
3 Wait for a dial tone, and then dial the extension of the system that you
want to add to the call.
4 Press the Select button again. The call becomes an audio-only conference
with all of the systems. If the system that dialed the flash hook hangs up,
the other systems remain connected in a call with audio and video, if the
capabilities are present.
You can customize what you see on the system screen, depending on how
your system is configured.
If your system administrator has allowed access to user settings, you can allow
the far-end system to control your camera. Far-end participants can also set
and use presets for your camera, if their systems support presets.
To allow the far end to control your camera:
1 From the Home screen, select
2 Select Allow Other Participants in a Call to Control Your Camera.
Changing this setting takes effect immediately, even if a call is in progress.
If your system administrator has allowed access to user settings, you can
choose whether to allow viewing of the room where the system is located or
video of calls in which the system participates.
> > Cameras.
Polycom, Inc.