Calling By Entering A Name Or Number - Polycom RealPresence Group 300 User Manual

User's Guide for the Polycom RealPresence Group Series
10
— > Place a Call > Recent Calls
• On the Home screen, choose a Speed Dial entry. This option must be
configured by your administrator.
• On the Home screen, choose Join from a meeting on your calendar. To
learn how to configure this calling method, refer to
Outlook Calendaring

Calling by Entering a Name or Number

To place a call by entering a name or number:
1 To place a call, do one of the following using your remote control:
— Press .
— Navigate to
2 In the dialing field, enter the dialing information as follows:
Numbers: To enter numbers, select each number on the keypad with the
remote control or enter numbers on your remote control.
Letters: To enter letters, select Keyboard. Then use your remote control to
select each letter on the onscreen keyboard. Or you can use the text-entry
method commonly used with cell phones to select letters directly on your
remote control.
The Keyboard button does not display on your system screen if a USB
keyboard is plugged into the system's USB port. After you unplug the USB
keyboard from the system's port, the Keyboard button displays.
Backspace: To delete a number or letter, press
Depending on the capabilities of your system and the system you are
calling, the dialing information could look like one of these examples:
— 10.11.12.13 (IPv4 address—include the dots)
— 2555 (E.164 extension for H.323 or SIP)
— stereo.polycom.com (host name)
— user@domain.com (SIP)
3 Enter any additional information needed for the call. The available
settings depend on the type of call and your system's configuration.
4 Press on the remote control to place the call or select Place a Call.
on page 34.
> Place a Call > Keypad.
Using Microsoft
on the remote control.
Polycom, Inc.