Power On Self Test (Post); Navigating The User Interface - Polycom RealPresence Group 300 User Manual

User's Guide for the Polycom RealPresence Group Series

Power On Self Test (POST)

Navigating the User Interface

8
After being powered on, the RealPresence Group systems automatically
perform system health checks before the systems are initialized. This process
is known as a power on self test, or POST. The status of the POST sequence is
displayed with the LED indicator light on the front of the device, or in the case
of the RealPresence Group 700 system, in the text field display on the front of
the system. All test results are logged in the system's memory. For more
information about what the colors of the indicator lights mean, refer to the
Administrator's Guide for Polycom RealPresence Group Series.
When the POST sequence completes with no severe errors, the RealPresence
Group system starts normally. If any warnings occur during POST, you can
view them after the system starts by going to
Status > Active Alerts. For more details, use your remote control to select
More Information. If a severe error occurs during startup, the system will not
start up. Contact Polycom technical support.
Cycle through the icons at the bottom of the Home screen to access system
features. To accomplish tasks, you can press buttons directly on your remote
control or use your remote control to navigate menus on the left side of the
local user interface.
Available icons on the home screen vary based on how your administrator
configured the system.
Your system's IP address, extension, and SIP address might be displayed on
the home screen if your administrator has configured them to be visible.
• Menu - Displays the Menu screen, which allows you to place a call,
change cameras, show content in a call, and show the Self View (PIP).
• Place a call - Displays the keypad so that you can enter numbers or
letters to make a call.
• Content - Allows you to send content from a supported device.
This icon appears only when a content source is detected.
• Settings - Displays the Settings screen, which allows you to open one
of the following screens:
— System Information - Displays the System Information screen,
which allows you to obtain system details, view system usage, run
diagnostic tests, and view call statistics.
> System Information >
Polycom, Inc.