Griddle With Fixed Brackets - Removal And Replacement - Thermador PRL304EG Service Manual

Service Manual for Thermador Pro Grand LP Gas Ranges, Models: PRL304EG, PRL364EDG, PRL364ELG, PRL366EG, PRL484ECG, PRL486EDG, PRL486EDPG, PRL484ELG
4.3.2 Griddle with Fixed Brackets – Removal and Replacement
Fiberglass
Wear gloves when handling fiberglass insulation
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Complete steps for Removing Knobs, Grates, and Burner
Assemblies, page 21.
3. Remove the griddle plate and grease tray (see Figure 39).
4. Carefully remove the bulb from the fixed retaining bracket (see
Figure 49).
NOTE: After removing the thermostat bulb from retaining bracket,
don't push the bulb through the receptacle in the element tray yet.
5. Disconnect the 1/4 inch spade connectors of both right and left
element wires. You may have to pull the element wires out a bit to
access the connectors – while doing this, be careful not to
damage the element wires.
58300000156573_ARA_EN_B
Figure 49: Removing Thermostat Bulb from Retaining Bracket
1 Retaining bracket
2 Thermostat bulb
3 Receptacle for removing bulb
Page 30 of 119