Removal and installation of the outside box (FR-HCB2) front cover
2.2
Removal and installation of the outside box (FR-HCB2) front
cover
Removal
1) Loosen the installation screws of the front cover.
Front cover
Reinstallation
1) Securely press the front cover
against the outside box.
Front cover
NOTE
Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front cover.
The same serial number is printed on the capacity plate of the front cover and the rating plate of the outside box.
Before reinstalling the front cover, check the serial numbers to ensure that the cover removed is reinstalled to the
outside box from where it was removed.
18
2) For removal, pull off the front cover.
Front cover
2) Tighten the cover with mounting
screws.
(Tightening torque: 1.7N m)
Front cover