Removal And Installation Of The Converter (Fr-Hc2); Cover - Mitsubishi Electric FR-HC2-7.5K Instruction Manual

Removal and installation of the converter (FR-HC2) front cover
2.1 Removal and installation of the converter (FR-HC2) front cover
Removal of the operation panel
1) Loosen the two fixed screws on the operation panel.
(These screws cannot be removed.)
When reinstalling the operation panel, insert it straight to reinstall securely and tighten the screws of the operation panel.
15K or lower
Removal
1)Loosen the installation screws of the front

cover.

Reinstallation
1) Insert the two fixed hooks on the left side
of the front cover into the sockets of the
inverter.
Front
cover
16
2) Push the left and right hooks of the operation panel and pull
the operation panel toward you to remove.
2)Pull the front cover toward you to remove by pushing an
installation hook using left fixed hooks as supports.
Front cover
2) Using the fixed hooks as supports,
securely press the front cover against
the inverter. (Although installation can
be done with the operation panel
mounted, make sure that a connector
is securely fixed.)
Front cover
Installation hook
3) Tighten the installation
screws and fix the front
cover.
Front cover