Table of Contents
Advertisement
Read/
Instruction
Item
Write
Parameter clear
Write
All clear
Read
H00 to H5B
Parameter
Write
H80 to HDB
Read
Link parameter
extended setting
Write
Refer to page 99 for data format (A, A1, B, B1, C, D, E, E1, F).
REMARKS
Set 65520 (HFFF0) as a parameter value "8888" and 65535 (HFFFF) as "9999".
For the instruction codes HFF and HF3, their values are held once written but cleared to zero when an converter reset or all
clear is performed.
code
All parameters return to the initial settings.
Whether to clear communication parameters or not can be
selected according to the data. (: Clear, : Not clear)
Refer to page 188 for parameter clear, all clear, and communication
parameters.
Clear Type
Parameter
clear
HFC
All parameter
clear
When clear is performed with H9696 or H9966, communication
related parameter settings also return to the initial values. When
resuming operation, set the parameters again. Performing clear
will clear the instruction code HF3, and HFF settings.
Turning OFF the power supply while clearing parameters with H5A5A or
H55AA also clears the communication parameter settings back to the
initial settings.
Refer to the instruction code (page 188) and write and/or read
parameter values as required.
When setting Pr. 100 and later, link parameter extended setting
must be set.
Parameter description is changed according to the H00 to H09
H7F
setting.
HFF
For details of the settings, refer to the instruction code (page 188).
Description of parameters
Data Description
Data
Communication Pr.
H9696
H5A5A
H9966
H55AA
Number of
Data Digits
(Format)
4 digits
(A,C/D)
4 digits
(B.E/D)
4 digits
(A,C/D)
2 digits
(B.E1/D)
2 digits
(A1,C/D)
3
107
Advertisement
Table of Contents
