Charging The Supplied Ni-Mh Battery - AOR AR-Mini Operating Manual

Wide range communications receiver 100 khz - 1300 mhz

Hide thumbs Also See for AR-Mini:

Table of Contents

PREPARATION AND BASIC USAGE

Charging the Supplied

Ni-MH Battery

Caution:

Never charge other type battery.

Especially, if the primary battery

(e.g., manganese or alkaline battery)

will be charged, it causes the ﬁre or

explosion.

The supplied Ni-MH batteries are

changed by the AC adaptor AA-mini.

Turn the AR-mini off.

Make sure the AR-mini contains a

supplied Ni-MH batteries.

Remove the external DC jack

cover.

Insert the DC output plug into the

external DC jack on the right side

of the AR-mini.

Insert the AC adapter power plug

into an AC outlet (100 V–240 V).

Press the PWR key to turn the

power on.

Hold down the FUNC key and

press the dial knob to enter the

setting mode.

Turn the dial knob to set the

setting mode number 30.

Hold down the FUNC key and turn

the dial knob to set CHARG.

• (

) is blinking.

Table of Contents