Download Print this page

Arrow Storage Products DKGA-A Owner's Manual And Assembly Manual page 2

Commander series, mountaineer series

Advertisement

BEFORE YOU BEGIN...
Safety precautions MUST be followed at all times throughout the construction of your building!
Below is a list of things you will need for installation.
WHAT YOU NEED
RECOMMENDED TIME SAVERS
•Care must be taken when handling various pieces of your building since
many contain sharp edges. Please wear work gloves, eye protection and long
sleeves when assembling or performing any maintenance on your building.
•Practice caution with the tools being used in the assembly. Be especially
familiar with the operation of all power tools.
•Keep children and pets away from the worksite during construction. Do not
allow children to help with assembly.
•Do NOT attempt to assemble this kit on a windy day. The large panels can
catch the wind like a "sail", causing them to be whipped around making
construction diffi cult and unsafe.
•At least two people must work together to assemble this kit. This will make
assembly faster and easier.
•You must securely anchor once assembled in the same manner as your
existing Commander™/ Mountaineer™ Shed.
•NEVER concentrate your weight on the roof of the building. When using a
step ladder make sure that it is fully open and on even ground before climbing
on it.
Work Gloves
Safety Glasses
Step Ladder
No. 2 Phillips Screwdriver (Magnetic Tip Preferred)
Utility Knife or Scissors
Pliers
Carpenter's Level
Tape Measure
Power Drill (Cordless, Variable Speed)
Nut Driver or Wrench
Square
String (for squaring the frame)
Awl (to align holes)
2
02J

Advertisement

loading