Arrow Storage Products DKGA-A Owner's Manual And Assembly Manual page 16

Step 5: Continued
You will need for this page:
SB
(QTY: 12)
4
Seal the gap between the Gables using the
Weather Stripping Tape as shown.
5
Position the Roof Beams as shown below
and attach to Gable and Truss using two (2)
Small Bolts and Nuts per side. Install the
Main Beam fi rst.
Beam End Views
Side of Beams with small holes must face up.
1
67293
Reused Parts:
• Roof Beam (4)
Weather
Stripping
Tape should wrap around
gap between Gables.
Weather Stripping Tape
Tape BOTH Gable joints before installing Roof Beams.
16
Roof Beams
Top View of Gables
CUT
16AG