Arrow Storage Products DKGA-A Owner's Manual And Assembly Manual page 14

Step 4: Continued
You will need for this page:
SS
(QTY: 40)
1
Working one side at a time, lift the Wall Panel into place and secure the Wall Panel with one
(1) Bolt and Nut through the center hole at the overlap (see below). Resecure Adjacent
Wall Panel to building with three (3) Small Screws through top, middle, and bottom holes.
2
Secure Wall Panel with four (4) Small Screws in the top of the Wall Panel, four (4) Small
Screws in the middle of the Wall Panel, and four (4) Small Screws in the bottom of the
Wall Panel.
3
Secure rib overlaps using fi ve (5) Small Screws. Repeat for other Wall Panel.
Place Bolt through center hole where Panels overlap.
SB
(QTY: 2)
Reused Parts:
• Wall Panel (2)
14
Use washers on all fasteners
used on painted parts.
14AG