Advertisement
Roof Install Prep Page
Read through all of Roof Assembly before beginning Step 6.
IMPORTANT:
Measure the building diagonally again to make sure the building is
square. The building should be square at the base and at the top.
This will make Roof Panels fi t better and holes will better align.
Crimped Rib
Whenever a crimped rib and an uncrimped rib meet,
place the crimped rib UNDER the uncrimped rib.
At this time, take a moment to ensure
the building is level and square.
Uncrimped Rib
The building is square when diagonal measurements are equal.
FASTEN TO RIDGE CAP
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO NEXT PANEL WITH BOLT AND NUT
FASTEN TO NEXT PANEL WITH SCREWS
FASTEN TO WALL ANGLE WITH SCREWS
18
18AG
Advertisement
