Advertisement
Step 5: Gables
You will need for this page:
LS
SB
(QTY: 16)
(QTY: 2)
Leave two holes open on each side of
the Gable peak to attach Track Support.
Attach Gable to holes closest
to the outside of the building.
SB
Install Track Support.
Reused Parts:
•
Left Gable (1)
•
Right Gable (1)
•
Gable Brace (1)
•
Track Support (2)
Gable must fi t UNDER Side Wall Angle at corner.
Gable
Inside
Rear Wall
LS
LS
LS
Working with one Gable at a time,
1
attach the Gables to the top Rear
Frame with Large Screws. Do not
insert screws into the two (2) holes closest
to where the Gables join. These will be
used to attach the Track Support later.
To secure Gables together, position
2
the Gable Brace as shown below
and insert a single Small Bolt and
Nut through the second hole from the
bottom only.
Outside
Attach Brace with Bolt thru
second hole from bottom only.
3
Position Track Supports as
shown. Secure Track Supports
to Gable using one Small Bolt
and Nut. Secure to Rear Frame
using two (2) Large Screws.
15
15AR
SB
Advertisement
