YASKAWA V7 Technical Manual page 67

5.13 LOCAL/REMOTE REFERENCE & SEQUENCE SELECTION
n008 : Reference Selection - Digital Operator
This parameter is only effective when the Drive is in the local mode.
SETTING DESCRIPTION
0 Frequency reference is controlled by the digital operator potentiometer
1 Frequency reference is controlled by a digital preset speed (n024) and is affected by n009.
n009 : Frequency Reference Setting
Method From Digital Operator
This parameter is only effective when the frequency reference is controlled by a digital preset (n024).
SETTING DESCRIPTION
0
key must be pressed in order for the drive to accept the frequency reference.
1 key does not have to be pressed.
The Drive responds immediately to the
Factory setting: 0
Range: 0 or 1
Factory setting: 0
Range: 0 or 1
and keys.
5-15
Continued