6 Spinning® Studio Console; About; Features - Precor SPINNER RALLY Service Manual

6 Spinning® Studio Console

About

®
The Spinning Studio Console is used on the Spinner
also used on Precor Spinner
cycles.
Refer to the SPINNING STUDIO "Owner's Manual" for the latest console install-
ation, use, and service information.
Operator's Guide
l

Features

Battery Powered Console and Cadence Sensor: The console is powered by 3 - AAA
l
batteries and the Cadence sensor uses a CR2032 lithium coin cell battery.
1
ANT+ connectivity: The console supports ANT+ wireless heart rate monitor chest
l
straps (however the Polar or Suunto ANT+ brand heart rate monitor chest straps are
not supported).
Program Memory: The console maintains programming code during battery replace-
l
ment.
1
ANT+ (pronounced ant plus) is a wireless protocol for monitoring sensor data such as a per-
son's heart rate or a bicycle's tire pressure
® ®
Ride™, Spinner Shift™, and Spinner
6 Spinning® Studio Console
®
Climb™ indoor cycle. This console is
®
Rally™ model indoor
About
62