General Information
The following information provides general equipment and service information that will help
you to use this manual to properly repair and maintain the bike.
Orientation Convention
The equipment orientation (front, right, left, back) used in manual is referenced to a user sitting
on the equipment facing the handlebars.
Tools
Recommended set of service and repair tools:
Metric Hex Key set (2.5 - 6 mm)
l
Metric Wrench set (10 - 21 mm)
l
Screw driver set )
l
Note: (1) Required for pedal removal.
Specification Summary
This table provides a summary of system component specifications.
System Component
Pedal Torque
Torque wrench 40 ft-lbs (54 N•m
l
Crank Extractor (Part: X-Tools Crank Extractor)
l
Belt Tension Gauge (recommended Kent-Moore BT-33-
l
73-F)
General Information
Specification
33 ft-lb (45 N•m)
1 Introduction
(1)
Page 3