Chain Drive Tension Adjustment; About; Procedure - Precor SPINNER RALLY Service Manual

Chain Drive Tension Adjustment

About

This procedure provides instruction to verify and make adjustments to the chain drive. The
chain tension should be verified anytime the chain is replaced, at regularly scheduled pre-
ventative maintenance, or when there are any unusual belt related issues (noises, pedal skip,
etc.) while operating the bike.
CAUTION: Improper chain adjustment will cause premature wear and may void the
Precor Limited Warranty.
Specifications
System Component
Chain Drive Tension
Axle Nut torque
Available Movies
(Internet Only)
Chain Tension Adjustment

Procedure

Review entire procedure before starting.
Chain tension verification
1. First verify the chain tension by inserting a screwdriver into the chain tension inspection
window (rear chain guard) and gently moving the chain up and down. A properly
adjusted chain will have 1/2 in (1.3 cm) up/dwn travel. If the chain is too loose or too
Specification
1/2 in (1.3 cm) up/dwn travel
29.5 ft-lbs (40 Nm)
11