Handlebar Adjustment Knob Replacement; About; Procedure - Precor SPINNER RALLY Service Manual

Handlebar Adjustment Knob Replacement

About

This procedure provides instruction to remove and install the Handlebar Adjustment Knob.

Procedure

Review entire procedure before starting.
Removal Instructions
1. Remove the handlebar assemble off the post slider, see
Replacement"
2. Fully tighten the handlebar adjustment knob. This will push the locking nut slightly above
the bottom edge of the adjustment knob bracket exposing the locking nut.
above.
4 Replacement Procedures
Handlebar Adjustment Knob Replacement
"Handlebar Adjustment Knob
34