Raymarine Marine GPS System User Manual page 93

Raymarine marine gps system user manual
Table of Contents

Advertisement

RayTech Navigator User's Guide
The hsb
You can use this chapter with the radar display set to simulator mode,
or on the water after you have installed and set up your hsb
Pathfinder Plus Radar system.
You can identify objects using either the radar/chart overlay or the
cursor echo feature: With cursor echo on you can select an object on
the radar display, the cursor is repeated on the chart display so you can
check the objects identity.
5-2
2
Series Pathfinder Plus Radar system includes the following:
Range scales: 1/8nm to 24nm up to 72nm (scanner-dependent).
Automatic and manual control of tuning, gain and sea clutter.
Two Variable Range Markers (VRMs) and Electronic Bearing
Lines (EBLs), allowing target range and bearing measurements.
Target wakes and target expansion mode.
Add marks to record important or dangerous locations.
10 Target MARPA for target tracking and risk analysis.
Note: Until you are familiar with interpreting the radar display,
you should take every opportunity to compare the
radars display patterns with visual targets, such as
other vessels, buoys and coastal structures. You should
practice harbor and coastal navigation during daylight
and in clear weather conditions.
2
Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Raytech 4.0

Table of Contents