Table of Contents
Advertisement
RayTech Navigator User's Guide
Polar Parameters Screen
To enter data into the Polar Parameters screen, do the following:
Click on any cell to edit its value
Loaded Polar Parameters filename appears here
5-52
1.
On the Polars screen, click the
Parameters screen is displayed (Figure 5-14).
Click Apply to plot new variables after editing
Figure 5-14. Polar Parameters Screen
2.
Replace as much of the default data as possible with real data
that you've collected. You can modify the default values
shown, or you can load an existing Polar Parameters file. To
modify the values shown, skip to Step 4. To load an existing
Polar Parameters file, click
is displayed.
3.
Choose the Polar Parameters file (.rpl extension) you want,
then click
Open
Polar
Click Open to load Polar Parameters
. The open file dialog box
Open
. The selected file is displayed.
tab. The Polar
Click Save/Save As to
save changes to file
Advertisement
Table of Contents
