Table of Contents
Advertisement
3.
Select a gauge, then decide whether you want the gauge
displayed by clicking
you want that gauge to display. In Figure 5-24, the tachometer
has been enabled, and the range has been set to a 6000 RPM
maximum.
4.
Repeat Step 3 for all gauges you want displayed on the panel.
5.
Click the
Panel
checkboxes on the Panel tab allow you to:
Display gauge sets for one or two engines.
Set the panel to appear above any other currently
displayed Navigator screens if any engine-related alarms
are generated.
Set the display style of the gauges. If you select
, gauges with white lettering on a black
Style Dials
background are displayed. If you leave the checkbox
empty, gauges with black lettering on a white
background are displayed.
Click the checkboxes you want, then click
Figure 5-26. Engine Panel Setting Screen Showing Panel Tab
Advanced Navigator Functions
. Next, select the setting(s)
Enabled
tab. As shown in Figure 5-26, the
Classic
.
OK
5-73
Advertisement
Table of Contents
