Raymarine Marine GPS System User Manual page 83

The Waypoints Properties dialog box contains the following:
field –Name of waypoint group.
Group Name
button – Displays group action menu (Fig. 4-20).
Groups
Waypoint Name
Rename button – Click to rename waypoint.
Latitude field – Latitude coordinate of waypoint.
field – Displayed only if
Range
and Pinged box is unchecked. Displays range of
waypoint in Metric or English units. Refer to "Setting
Relative Waypoints" for more information.
checkbox – If checked, waypoint cannot be
Locked
accidentally dragged from its chart insertion point.
Longitude field – Longitude coordinate of waypoint.
field – Displayed only if
Bearing
checked and
Pinged
bearing of waypoint in Metric or English units. Refer
to "Setting Relative Waypoints" for more information.
Show on Chart
displayed on chart
window – Additional information about waypoint.
Notes
checkbox – If checked, range circles are
Range Circles
displayed around waypoint.
field –Range Circle radius in Nautical Miles.
Radius (NM)
field – Number of Range Circles displayed.
Number
Relative checkbox – If checked, enables you to place a
waypoint that remains relative to another waypoint.
Refer to "Setting Relative Waypoints" for more details.
checkbox – Refer to "Setting Relative Waypoints"
Pinged
for more information.
Working With Charts And Routes
field – Name of waypoint.
Relative
Relative
box is unchecked. Displays
checkbox – If checked, waypoint is
box is checked
box is
4-19