Table of Contents
Advertisement
Using the White Line
Using Zoom
The White Line feature separates echoes from fish near the bottom and
the bottom itself. When White Line is switched on, the Fishfinder
displays echoes differently. The strongest echoes display in the back-
ground color with a thin line on top. All other echoes remain unchanged.
To switch the white line feature on and off:
1.
On the Pathfinder Panel, click
button is displayed.
2.
Click White Line button to toggle the white line On/Off.
Zoom enlarges all or part of the scrolling bottom display. You can
select automatic zoom so the Fishfinder selects a zoom level that
keeps the bottom in the lower half of the display window.
Alternatively, you can manually pick the area to zoom.
To use zoom:
1.
From the top-level Functionbar menu, click
2.
If necessary, click
3.
Click
window zoom image or split windows.
If you select split windows, the display is split
vertically, with the zoom image in the left-hand
window and the scrolling bottom display in the right-
hand window. In a split window display, a vertical bar
appears (along the right hand edge of the scrolling
bottom image) that references the range being
displayed in the zoom window. This bar varies in
height with the selected zoom level.
4.
If necessary, click
setting between manual and automatic. The manual
setting allows you to reposition the zoomed image.
5.
For zoom level selection, click the
from
6.
Click
level Functionbar menu.
Zoom: On/Off
to toggle between a full
Zoom: Full/Split
Zoom: Man/Auto
,
, or
zooms levels.
2x
4x
6x
,
, or
ENTER
CLEAR
Advanced Navigator Functions
, the
MULTI
White Line
Zoom
to toggle zoom on.
to toggle the
ZoomX
to select
to return to the top-
BACK
.
5-45
Advertisement
Table of Contents
