Table of Contents
Advertisement
4.
Draw the route you want to take. Left-click at the places
where you want to leave a waypoint marker. To remove
waypoints, click the
toolbar.
The route name along with the range and bearing of each leg
is displayed between each waypoint (Figure 4-9).
5.
As shown in Figure 4-9, when you reach the end of the route,
right-click and select
the
To end the route, right-click and select
Finish Quick Route
, or, click the Create Route
button
on the Toolbar
Undo Wp
Finish Quick Route,
button
Create Route
Figure 4-9. Completing a Route
Working With Charts And Routes
button
or just click
on the toolbar.
Left-click to place waypoints
on the
4-9
Advertisement
Table of Contents
