Raymarine Marine GPS System User Manual page 145

RayTech Navigator User's Guide
Data Tests Screen
To enter values into the Data Tests screen, do the following:
Double-click data row to display corresponding
Test Parameters screen (Figure 4)
5-54
1. On the Polars screen, click the
screen is displayed (Figure 5-15). This screen initially
contains a single row of test data; however, you can store
and edit as many different test data rows as you need,
each row representing a unique run and its associated
performance statistics.
Click Clear Filters to remove
applied filters from data row
Figure 5-15. Data Tests Screen
tab. The Data Tests
Data
Click Filters to restrict the display of test
data rows to those matching your criteria
Highlight data row, then click
Delete to remove it from the list