Raymarine Marine GPS System User Manual page 72

RayTech Navigator User's Guide
Distance and bearing of leg appears between waypoints
Route name appears at originating point and at each additional waypoint
4-8
2. Type in a name (up to 13 characters including blanks) for
your route, or click
Note: Identical route names will overwrite each other
without a confirmation warning.
3. Click . The Standard cursor
OK
cursor (Figure 4-8). Move the cursor over the area
where you want the route to begin, then left-click the mouse.
The route is started, and the name you chose along with range
and bearing of the first leg is displayed (Figure 4-8).
Figure 4-8. Beginning a Route
OK to accept the default name of "Qr."
changes to the Route
Draw Route cursor