Raymarine Marine GPS System User Manual page 115

RayTech Navigator User's Guide
Moving a VRM/EBL
You can control VRM/EBL separately or together.
To move a VRM or EBL:
5-24
1.
Click the
VRM/EBL
2.
Click the button that corresponds to what you want to
modify:
VRM/EBL 1
dialog box for the selected VRM/EBL appears.
3.
Click
VRM/EBL On
the radar picture in its last-used position. The object is
displayed with dashed-lines.
4.
From the drop-down dialog box, select the item that
corresponds to the action you want:
To Move:
Selected VRM/EBL combination
Selected VRM only
Selected EBL only
5. The selected object is displayed as a solid line. The cursor
appears with arrows on all four corners.
6. Press and hold the left mouse button as you drag the EBL
to the new angle and/or change the VRM radius (range).
7. Release the mouse button to drop the VRM/EBL in its
new position. The object is again displayed with dashed-
lines.
button on the Pathfinder Panel.
or . A drop-down
VRM/EBL 2
to display the selected VRM/EBL on
Click:
Edit VRM/EBL
Edit VRM
Edit EBL