Raymarine Marine GPS System User Manual page 78

RayTech Navigator User's Guide
To put a new waypoint at your vessel's current position:
4-14
1. As shown in Figure 4-15, select
from the Waypoint menu, or, click
on the function bar.
The Waypoint At Vessel information dialog box appears
(Figure 4-16). The dialog box shows the time the waypoint
is added, and has a space where you can type relevant infor-
mation, such as location, water depth and temperature, etc.
2. Type your information into work space (optional), then click
OK to place new waypoint on the chart.
Figure 4-15. Placing A Waypoint At The Vessel's Current Position
Figure 4-16. Waypoint At Vessel Information Dialog Box
Place Waypoint at Vessel
Marks/Wpt at Vessel