Table of Contents
Advertisement
Connecting to Ockam Instruments
Table A-9. Connecting Navigator to an Ockam 050D RS-232 Interface
Navigator connects to Ockam instruments via Ockam's Model 050D
RS-232 Interface (which you must supply). You must also set two
switches on the Ockam unit.
Note: You can connect Navigator to any model Ockam
RS-232 Interface; however, to ensure optimum
reliability of the data transfer, we recommend
that you use Ockam Model 050D.
To connect to an Ockam Model 050D RS-232 Interface:
1.
Set Switch
S1
2.
Set Switch
S2
3.
Refer to Figure A-1 and Table A-9 to make the required cable
connections.
Connect Cable Color:
Yellow (Rx)
Blue (SGnd)
Green (Tx)
Black (SGnd)
Appendix A – Connecting Peripheral Instruments
on Model 050D to
.
4
to
.
D
To Ockam 050D Pin:
Pin 4
Not used
Pin 2
Pin 1
A-11
Advertisement
Table of Contents
