Onboard Pci Expansion Slot Air Blocker; Flexiblelom Blank - HP Apollo 4200 Gen9 Maintenance And Service Manual

If you are removing a storage controller board with a cache module installed, remove the cache module
8.
("FBWC module" on page 53).
To replace the component, reverse the removal procedure.

Onboard PCI expansion slot air blocker

CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 17).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 27).
3.
Remove the access panel
4.
Remove the onboard PCI expansion slot cover.
5.
To replace the component, reverse the removal procedure.

FlexibleLOM blank

CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To prevent damage to electrical components, take the appropriate anti-static
To prevent improper cooling and thermal damage, do not operate the server unless
("Access panel" on page 36).
To prevent damage to electrical components, take the appropriate anti-static
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 70