HP Apollo 4200 Gen9 Maintenance And Service Manual page 105

Open each of the processor locking levers in the order indicated, and then open the processor retaining
12.
bracket.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board, do not touch the processor or the processor socket contacts.
Remove the processor from the processor retaining bracket.
13.
Disconnect all cables connected to the system board.
14.
If installed, remove the dedicated iLO module
15.
Remove the power pass-through module
16.
Remove the cable management holder.
17.
("Dedicated iLO management
("Power pass-through module" on page 115).
Removal and replacement procedures 105
DRAFT - HP Confidential - DRAFT
module" on page 111).