WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 17).
1.
Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
Remove the air baffle
4.
Disconnect all cables connected to the drive cage backplane.
5.
Disconnecting the cables from the four-bay LFF hot-plug rear drive cage connected to the front drive
o
cage 2 backplane
("Access
panel" on page 36).
("Air
baffle" on page 37).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 38