Remove the server from the rack (on page 27).
2.
Pull down the front drive cage release latches and use them to completely extend the front drive cages
3.
from the chassis.
Remove the access panel
4.
Remove the air baffle
5.
Open the cable management holder (on page 32).
6.
Disconnect the front drive cage 1 and cage 2 power cables from the system board.
7.
Remove the cable management holder.
8.
("Access
panel" on page 36).
("Air
baffle" on page 37).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 78