Remove the rear option blank.
5.
To replace the component, reverse the removal procedure.
Chassis retention bracket
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 17).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 27).
3.
To prevent damage to electrical components, take the appropriate anti-static
To prevent improper cooling and thermal damage, do not operate the server unless
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 72