HP Apollo 4200 Gen9 Maintenance And Service Manual page 41

Disconnecting the cables from the two-bay SFF hot-plug rear drive cage connected to the front drive
o
cage 2 backplane
Disconnecting the cables from the two-bay SFF hot-plug rear drive cage connected to the system
o
board
Remove the rear drive cage:
6.
Loosen the captive screws to detach the rear drive cage from system board.
a.
Loosen the thumbscrews to detach the drive cage from the rear panel.
b.
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 41