Expansion Board Options; Pci Expansion Slot Definitions; Expansion Board - HP ProLiant DL360 SERIES User Manual

58 HP ProLiant DL360 Generation 4p Server User Guide
10. Be sure that the front panel external health LED is green ("Front Panel LEDs
and Buttons" on page 8).

Expansion Board Options

For instructions on installing a RILOE II board, refer to the HP Remote Insight
Lights-Out Edition II User Guide on the Documentation CD.

PCI Expansion Slot Definitions

Slot
PCI-X expansion slot 1
PCI-X expansion slot 2
PCI Express expansion
slot 1 (optional)
PCI Express expansion
slot 2 (optional)

Expansion Board

1. Power down the server ("Powering Down the Server" on page 25).
2. Extend the server from the rack, if applicable ("Extending the Server from
the Rack" on page 26).
3. Remove the access panel ("Removing the Access Panel" on page 27).
4. Remove the PCI riser board assembly.
IMPORTANT: The optional RILOE II board can be installed only in
slot 2. If you plan to install a RILOE II board in the future, leave slot 2
unpopulated.
Board Size
Half-length
Full-length
Half-length
Full-length
Connector Interconnect
133 MHz, 3.3 V 64-bit
133 MHz, 3.3 V 64-bit
x8 x1, x4, or x8
x8 x1, x4, or x8