HP Apollo 4200 Gen9 Maintenance And Service Manual page 76

Remove the server from the rack (on page 27).
2.
Remove the access panel
3.
Remove the air baffle
4.
Open the cable management holder (on page 32).
5.
Pull down the front drive cage release latches and use them to completely extend the front drive cages
6.
from the chassis.
Disconnect all system cables secured in the cable management holder from the system board or
7.
controller board, and then release them from the holder.
Press and hold the cable management holder release latch, and then move the holder up.
8.
("Access panel" on page 36).
("Air baffle" on page 37).
DRAFT - HP Confidential - DRAFT
Removal and replacement procedures 76